Wells Roll-Pack System
The WELLS Roll-Pack System is a cost-effective means for packaging spring units for shipping or storage. It enables a single operator to pack between 750 and 950 innerspring units in a normal 8-hour shift, and it reduces storage costs.
The Roll-Pack System by WELLS is designed to roll pack standard spring systems, including Bonnell, double and triple offset, pocket springs, open-end springs and all continuous coil systems.
- PLC controlled
- AC variable speed
- Ergonomically correct entry height
- Interchangeable Mandrel
- Ball screw striper assembly
- Metric construction
- Working width - up to 2.3M (91.75 in)
| Power Requirements |
| Electrical: |
11 kw 30 amps @ 380 volts |
| Air: |
.07 m3/cycle @ 6.9 bar (2.4 cub. ft/cycle @ 100 psi) |
| Dimensions |
| Machine with loading table: |
412.24 cm x 259 cm (162 in x 102 in) |
| Discharge Table: |
198.12 cm x 121.9 cm (78 in x 48 in) |
| Speed |
| Programmable infeed speeds |
| Options |
- Discharge table
- Material Stand
- 177.8 mm (7 in) diameter Mandrel for up to 100 mm (3.93 in)
- 304.8 mm (12 in) diameter Mandrel for up to 146 mm (5.75 in)
Note: The finished height of the unit measured from helical to helical is a function of heat treat method and coil design as well as wire specification and can vary; height of 5-3/8" to 5-1/2" can be expected, after coil packing on 12" mandrel.
|
| Packaging Materials |
- Paper
- Fabric
- Machine can handle either or both materials
|
